33
4. Operating procedure
Operation of the variable wind-speed function and the method of entry
4 Setting the wind speed during
operation.
During operatio, “R” of “FAN:R” in the wind speed
screen flashes.
Enter “1 to 10” in the main screen with
and
keys and acknowledge with the
key.
※
Note that the set value “0” cannot be set when the set
temperature exceeding 130
℃
has been set in any of
constant-value, auto start, and auto stop operations.
5 Setting the wind speed at end of
operation
At end of operation, “F” of “FAN:F” in the wind speed
screen flashes.
Enter “1 to 10” in the main screen with
and
keys and acknowledge with the
key.
Press the
key twice, and the standby screen is
reset to the “Operating” screen (namely reset to the
screen just before entry in the menu screen.
※
Note that the set value “0” cannot be set when the set
temperature exceeding 130
℃
has been set in any of
constant-value, auto start, and auto stop operations.
6 Determining the wind speed for
programmed operation.
The wind speed for programmed operation can be set
at the END step.
※
The set value for #FAN:F” in this setting screen is
not applicable as the FAN speed value at end of
programmed operation.
