Chapter 1 Read these instructions before use
8
1-5. Name of each part
1-6. To maintain the performance of the
DF870
●
Wash the platform with clean water and then carefully wipe off the moisture with a clean dry cloth.
If you use seawater, unclean water, or contaminated water, machine failure may occur.
●
Use a soft cloth when wiping stains off the whole of the DF870. Do not use a scrubber, brush, or others.
●
To clean the DF870 using neutral detergent, (1) moisten a sponge with neutral detergent, (2) wipe stains
off the DF870 with the sponge, (3) wash the DF870 with clean water, and then (4) carefully wipe off the
moisture with a clean dry cloth.
●
To disinfect the whole of the DF870 using alcohol, (1) moisten a cloth with a solution of up to 80% alcohol
concentration, (2) wipe stains off the DF870 with the cloth, (3) wash the DF870 with clean water, and then
(4) carefully wipe off the moisture with a clean dry cloth. Wash the display panel with clean water.
●
Never disassemble or modify the DF870. Otherwise, it may deteriorate the water-proof performance of the
DF870.
If, by any chance, you have disassembled the DF870 by mistake, be sure to contact your vendor.
●
Do not drop the DF870. Do not allow the DF870 to hit against hard objects such as a table.
●
Do not push the display panel, operation keys, or rubber area with your fingernail or other pointed objects.
●
After use, store the DF870 in a dry place with small temperature fluctuation.
Leveling leg
USB port
Printer
Foot electrodes
Spirit level
Finger electrodes
Finger electrode stick
Auxiliary leg
Column
Platform
Display panel
Operation keys
Printer open/close key
Paper feed key