Chapter 1 Read these instructions before use
4
: To avoid a fire or electrical shock
If you use the DF870 that is in abnormal conditions (e.g. it is giving off smoke or a strange
odor), a fire or an electric shock may occur.
Immediately unplug the power cord from the electrical outlet. Confirm that it no longer gives out
smoke, and then ask your vendor for repairs.
The users are strongly advised not to repair the DF870 on their own as doing so is very
dangerous.
Warning
: Do not conduct therapeutic exercise through self-diagnosis.
Use measured results only as a guide. When conducting therapeutic exercise or going on a
diet, be sure to observe the instructions from the doctor or a specialist.
: If the display tube is damaged and leaking fluid, ensure that the fluid does not enter
anybody’s mouth.
The LCD display tube contains poisonous fluid. Pay special attention to babies and small
children to keep them away.
: Do not stand on the platform with socks or wet feet.
If you slip on the platform, you may suffer serious injuries. Stand on the platform with bare feet.
: Do not use the DF870 on a slippery floor.
If the DF870 slides during use, you may suffer serious injuries. Use it on a non-slippery floor.
: Do not stand on any places other than on the platform.
Otherwise, the DF870 may tip over, leading to serious injuries. If you have any physical
impairment, ask a helper for assistance.
: Do not jump or bounce on the DF870.
You may trip or fall, and suffer serious injuries. It may also cause machine failure. Gently step
on the platform.
: Do not forcibly bend the power plug or place anything heavy on it.
Otherwise, the power plug may get damaged, leading to a fire or electric shock.
If the power plug is damaged, do not use the DF870.
: Do not use the DF870 if its cord is caught on something.
Otherwise, the DF870 may tip over, leading to injuries.
: If the DF870 gives off smoke or a strange odor, stop using it.
Otherwise, a fire may occur. Immediately unplug the power cord and consult your vendor.
: Never disassemble or modify the printer.
Otherwise, the printer may generate heat and cause ignition, leading to a fire or other
accidents.
: To avoid injuries and property damage
(1) When you place several items on the weighing platform, ensure to keep them from
collapsing or falling down.
(2) Unplug the power cord from the electrical outlet after use.
(3) Do not place your finger(s) into a gap, a hole, or any other pinching points on the DF870.
(4) Never disassemble or modify the DF870.
(5) When you carry or move the DF870, be sure to hold the bottom of the DF870 with both
hands. (Never carry it in a poor posture or by holding the indicator section or the
column.)