Yamatake SDC10 Series Manual Download

Page: 37 / 156

Digital Controller SIO Driver

GP-Pro EX Device/PLC Connection Manual

Settings of External Device

To configure communication settings for the External Device, use the PARA, ENT, DISP, Down and Up keys on

the front of the Controller. Refer to your Controller manual for details.

Procedure

In the basic display, press the PARA key to move to setup mode.

Press the ENT key to display the setup items.

Press the Down/Up keys to select a setup item and press the ENT key.

Use the Down/Up keys to select a setting and press the ENT key.

Press the DISP key to move to the basic display.

Settings

Setup Items

Settings

C25

C26

C27

• The parameters to be set vary depending on the Controller. Refer to your Controller manual

for details.

Summary of Contents for SDC10 Series





























































































































































Search results

Summary of Contents for SDC10 Series

Reviews:

Related manuals for SDC10 Series

Brands by name

Popular brands

Yamatake SDC10 Series, Manual

Search results

Summary of Contents for SDC10 Series

Reviews:

Related manuals for SDC10 Series

Brands by name

Popular brands