Instrument and control functions
4-5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
reset. However, the odometer and trip-
meter units can be switched between
miles and kilometers by pushing the
“SELECT” button for 1 second.
Tripmeter mode
The tripmeter shows the distance trav-
eled since it was last reset. If not reset
after a trip, the displayed value will re-
turn to 0.0 after 9999.9 miles or kilome-
ters have elapsed. To reset the
tripmeter, push the “RESET” button for
1 second.
Oil change tripmeter mode
The oil change tripmeter shows the dis-
tance traveled since the engine oil was
last changed and this tripmeter was re-
set. To reset the oil change tripmeter
(and the oil change indicator), push the
“RESET” button for 1 second. Then,
while the oil change indicator is flash-
ing, push the “RESET” button for 3 sec-
onds. The oil change tripmeter will
reset and the oil change indicator will
stop flashing. Push the “SELECT” but-
ton to start the oil change tripmeter and
change the display to odometer mode.
Oil change indicator “OIL
CHANGE”
The engine oil indicator will flash at the
initial 1000 km (600 mi) and then at ev-
ery 3000 km (1800 mi) thereafter to in-
dicate that the engine oil should be
changed.
After changing the engine oil, be sure to
reset the oil change tripmeter because
this indicator works in conjuntion with
the oil change tripmeter and must be
reset.
If the engine oil is changed before the
oil change indicator flashes (i.e. before
the periodic oil change interval has
been reached), the oil change tripmeter
must be reset in order for the next peri-
odic oil change to be indicated at the
correct time.
TIP
If the oil change tripmeter is reset be-
fore the initial 1000 km (600 mi), the pe-
riodic oil change interval will be at every
1. Odometer
1. Tripmeter
1
1
1. Oil change tripmeter
1
BC9-9-14E0.book 5 ページ ２０１９年５月８日 水曜日 午後１時２２分
