manualshive.com logo in svg

Yamaha ZUMA 125, Owner'S Manual, Page: 75 / 96

Share
Download
Yamaha ZUMA 125 Owner'S Manual Download Page 75

Scooter care and storage

8-2

1

2

3

4

5

6

7

8

9

10

11

12

13

14

harsh chemicals, including
strong acidic wheel cleaners,
especially on spoke or magne-
sium wheels.

harsh chemicals, abrasive
cleaning compounds, or wax on
matte-finished parts. Brushes
can scratch and damage the
matte-finish, use soft sponge or
towel only.

towels, sponges, or brushes
contaminated with abrasive
cleaning products or strong
chemicals such as, solvents,
gasoline, rust removers, brake
fluid, or antifreeze, etc.

Before washing

1. Park the vehicle out of direct sun-

light and allow it to cool. This will
help avoid water spots.

2. Make sure all caps, covers, electri-

cal couplers and connectors are
tightly installed.

3. Cover the muffler end with a plas-

tic bag and a strong rubber band.

4. Pre-soak stubborn stains like in-

sects or bird droppings with a wet
towel for a few minutes.

5. Remove road grime and oil stains

with a biodegradable degreaser
(YAMACLEAN Pro-Wash Spray)
and a plastic-bristle brush or
sponge. 

NOTICE:

 Do not use de-

greasing agent on areas requir-
ing lubrication such as seals,
gaskets, and wheel axles. Fol-
low product instructions.

[ECA26290]

Washing

1. Rinse off any degreaser and spray

down the vehicle with a garden

hose. Use only enough pressure to
do the job. Avoid spraying water
directly into the muffler, instrument
panel, air inlet, or other inner areas
such as underseat storage com-
partments.

2. Wash the vehicle with a quality

automotive-type detergent
(YAMALUBE Wash & Wax)
mixed with cool water and a
soft, clean towel or sponge.
Use an old toothbrush or plas-
tic-bristle brush for hard-to-
reach places. 

NOTICE:

 Use

cold water if the vehicle has
been exposed to salt. Warm
water will increase salt’s cor-
rosive properties.

[ECA26301]

3. For windshield-equipped vehicles:

Clean the windshield with a soft
towel or sponge dampened with
water and a pH neutral detergent.
If necessary, use a high-quality
windshield cleaner (YAMACLEAN
Glass Cleaner) or windshield pol-
ish. 

NOTICE:

 Never use any

strong chemicals to clean the
windshield. Additionally, some
cleaning compounds for plastic
may scratch the windshield, so
be sure to test all cleaning prod-
ucts before general applica-
tion.

[ECA26310]

4. Rinse off thoroughly with clean wa-

ter. Be sure to remove all deter-
gent residues, as they can be
harmful to plastic parts.

After washing

1. Dry the vehicle with a chamois or

absorbent towel, preferably micro-
fiber terrycloth.

BC9-9-14E0.book  2 ページ  ２０１９年５月８日　水曜日　午後１時２２分

Summary of Contents for ZUMA 125

































































































Reviews:

No comments