Yamaha ZUMA 125 Owner'S Manual Download Page 33

Page: 33 / 96

Instrument and control functions

4-17

With the engine still off:
7. Move the sidestand up.
8. Apply the front or rear brake.
9. Push the start switch.

Does the engine start?

With the engine still running:
10. Move the sidestand down.

Does the engine stall?

The system is OK.

The scooter can be

ridden.

The sidestand switch may not be
working.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The brake switch may not be working.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The sidestand switch may not be
working.

The scooter should not be ridden

until

checked by a Yamaha dealer.

WARNING

YES

With the engine turned off:
1. Place vehicle on centerstand.
2. Move the sidestand down.
3. Set engine stop switch to run position.
4. Turn main switch to on position.
5. Apply the front or rear brake.
6. Push the start switch.

Does the engine start?

The vehicle must be placed on the
centerstand during this inspection.

If a malfunction is found, have the
vehicle inspected before riding.



BC9-9-14E0.book 17 ページ２０１９年５月８日　水曜日　午後１時２２分

Summary of Contents for ZUMA 125

































































































Search results

Summary of Contents for ZUMA 125

Reviews:

Related manuals for ZUMA 125

Brands by name

Popular brands

Yamaha ZUMA 125, Owner'S Manual

Search results

Summary of Contents for ZUMA 125

Reviews:

Related manuals for ZUMA 125

Brands by name

Popular brands