Yamaha ZUMA 125 Owner'S Manual Download Page 17

Page: 17 / 96

4-1

Instrument and control functions

EAU45441

Main switch/steering lock

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.

TIP

The main switch/steering lock is
equipped with a keyhole cover. (See
page 4-2.)

EAU84031

All electrical circuits are supplied with
power and the vehicle lights are turned
on. The engine can be started. The key
cannot be removed.

TIP



The headlight(s) will turn on when
the engine is started.



To prevent battery drain, do not
leave the key in the on position
without the engine running.

EAU10662

OFF

All electrical systems are off. The key
can be removed.

WARNING

EWA10062

Never turn the key to “OFF” or
“LOCK” while the vehicle is moving.

Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.

EAU1068B

LOCK

The steering is locked and all electrical
systems are off. The key can be re-
moved.

To lock the steering

1. Turn the handlebars all the way to

the left.

2. With the key in the “OFF” position,

push the key in and turn it to
“LOCK”.

3. Remove the key.

TIP

If the steering will not lock, try turning
the handlebars back to the right slightly.

OFF

LOCK

1. Push.
2. Turn.

BC9-9-14E0.book 1 ページ２０１９年５月８日　水曜日　午後１時２２分

Summary of Contents for ZUMA 125

































































































Search results

Summary of Contents for ZUMA 125

Reviews:

Related manuals for ZUMA 125

Brands by name

Popular brands

Yamaha ZUMA 125, Owner'S Manual

Search results

Summary of Contents for ZUMA 125

Reviews:

Related manuals for ZUMA 125

Brands by name

Popular brands