Basic components
19
EMU26340
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
EMU26391
Top cowling lock levers
To remove the outboard motor top cowling,
pull up the front and rear lock levers. Then lift
off the cowling. When the cowling, check to
be sure it fits properly in the rubber seal.
Then lock the cowling again by moving the
levers downward.
CAUTION:
ECM00550
The air intake grille on the top cowling is
not designed as a handle and could break
if used as such.
1. Trim tab
2. Bolt
3. Cap
A
B
ZMU01863
1. Tilt support lever
1. Top cowling lock lever(s)
ZMU03979
1
ZMU03986
1
Summary of Contents for Z200
