– 74 –
Procedure to install the engine (unchangeable)
1. Attach the two engine adjusting bolts 1 to
the frame COMP. temporarily.
2. Fit the engine installation position to the
frame COMP and attach the bolts 2 and 3
temporarily.
3. Attach the bolt 4 temporarily.
4. Attach the engine mount boss 5 and 6 to
the frame COMP. temporarily and then
attach the bolt 7 temporarily.
5. Tighten the two engine adjusting bolts 1 at
specified torque.
Check that the bearing surface of the bolts
1 completely fit the surface of the engine.
6. Tighten the two nuts 8 and 9 at specified
torque. Tighten the nut 8 (lower side) at
first, then tighten the nut 9 (upper side).
7. Tighten the bolt 4 at specified torque.
8. Tighten the bolt 7 at specified torque.
FWD
FWD
7 5
6
4
3
2
9
8
1
1
TIP
For information about tightening torque
and requirement for lubricant agent, see
the list of tightening torque.
