5 - 48
CHAS
STEERING
4. Install:
●
Steering ring nut
1
Tighten the steering ring nut using the
steering nut wrench
2
.
Refer to “STEERING HEAD INSPEC-
TION AND ADJUSTMENT” section in
the CHAPTER 3.
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
5. Check the steering stem by turning it lock
to lock. If there is any binding, remove
the steering stem assembly and inspect
the steering bearings.
6. Install:
●
Front fork
1
●
Upper bracket
2
NOTE:
●
Temporarily tighten the pinch bolts (lower
bracket).
●
Do not tighten the pinch bolts (upper bracket)
yet.
7. Install:
●
Washer
1
●
Steering stem nut
2
T
R
.
.
145 Nm (14.5 m · kg, 105 ft · lb)
8. After tightening the nut, check the steer-
ing for smooth movement. If not, adjust
the steering by loosening the steering
ring nut little by little.
9. Adjust:
●
Front fork top end
a
Front fork top end (standard)
a
:
5 mm (0.20 in)
