Yamaha YZ125(T)/T1, Owner'S Service Manual

Page: 298 / 568

4-43
ENG
KICK AXLE, SHIFT SHAFT AND PRIMARY DRIVE
GEAR
4. Hook:
9 Torsion spring
1
NOTE:
Turn the torsion spring clockwise and hook into
the proper hole
a
in the crankcase.
EC4C5402
Kick idle gear
1. Install:
9
Kick idle gear
1
9
Plain washer
2
9
Circlip
3
NOTE:
Apply the transmission oil on the kick idle gear
inner circumference.
EC4C5503
Primary drive gear
1. Install:
9 Spacer
1
9 Primary drive gear
2
9 Bolt
3
NOTE:
Install the primary drive gear with its depressed
side toward you.
2. Install:
9 Primary driven gear
Refer to “CLUTCH AND PRIMARY DRI-
VEN GEAR” section.
3. Tighten:
9 Bolt (primary drive gear)
1
NOTE:
Place an aluminum plate
a
between the teeth of
the primary drive gear
2
and driven gear
3
.
4. Install:
9 Dowel pin
1
9 Gasket [crankcase cover (right)]
2
48 Nm (4.8 m•kg, 35 ft•lb)
1C3-9-30-4C 25/5/04 7:17 PM Page 14