5-58
CHAS
SWINGARM
EC575000
ASSEMBLY AND INSTALLATION
EC575202
Bearing and oil seal
1. Install:
9
Bearing
1
9
Oil seal
2
To swingarm.
NOTE:
9
Apply the molybdenum disulfide grease on the
bearing when installing.
9
Install the bearing by pressing it on the side hav-
ing the manufacture’s marks or numbers.
9
First install the outer and then the inner bear-
ings to a specified depth from inside.
Installed depth of bearings:
Outer
a
a
: Zero mm (Zero in)
Inner
b
b
: 6.5 mm (0.26 in)
EC574311
Connecting rod
1. Inspect:
9
Bearing
1
9
Collar
2
Free play exists/Unsmooth revolution/Rust
→
Replace bearing and collar as a set.
2. Inspect:
9
Oil seal
3
Damage
→
Replace.
2. Install:
9
Bearing
1
9
Plain washer
2
9
Oil seal
3
To relay arm.
NOTE:
9
Apply the molybdenum disulfide grease on the
bearing when installing.
9
Install the bearing by pressing it on the side hav-
ing the manufacture’s marks or numbers.
9
Apply the molybdenum disulfide grease on the
plain washer.
Installed depth of bearings
a
a
:
Zero mm (Zero in)
1C3-9-32-5D 4/7/06 2:51 PM Page 8