4-44
ENG
KICK AXLE, SHIFT SHAFT AND PRIMARY DRIVE
GEAR
5. Install:
9
Crankcase cover (right)
1
NOTE:
Mesh the governor gear
2
, and impeller shaft
gear
3
with primary drive gear
4
.
6. Install:
9
Bolt [crankcase cover (right)]
1
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
7. Install:
9
Kick starter
1
9
Plain washer
2
9
Bolt (kick starter)
3
NOTE:
Install the kick starter closest to but not contact-
ing the pillar tube
4
.
8. Install:
9
Shift pedal
1
9
Bolt (shift pedal)
2
NOTE:
Align the upper line
a
of the shift pedal with the
center
b
of the crankcase projection and rotate
the shift pedal counterclockwise until it first
engages. Then install the shift pedal.
12 Nm (1.2 m•kg, 8.7 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
1C3-9-32-4C 4/6/06 2:12 PM Page 16