46
En
DAB (Digital Audio Broadcasting)
Before tuning into DAB services, you must perform the
initial scan.
1
Press DAB repeatedly to select DAB.
“Initiate Scan” appears in the front panel display.
y
When you have already performed the initial scan before
you set this unit to the DAB tuning mode for the first time,
“Initiate Scan” does not appear in the front panel display.
See step 3 on page 47, and proceed with the DAB tuning
operation.
2
Press
k
/
n
/
l
/
h
to start the initial scan
operation.
This unit starts the scan for DAB ensembles. While
the scan is in progress, “Scanning” and the
percentage of the progress of the scan appear in the
front panel display. When this unit completes the
scan, “FINISH” and the number of receivable DAB
services appear in the front panel display, and then
this unit enters the DAB tuning mode automatically.
y
When you want to cancel the initial scan in the middle, press
RETURN.
• If the initial scan operation is not successful, “Not
Available” appears in the front panel display. You can start
the initial scan again by pressing
k
/
n
/
l
/
h
.
• For further details about problems and their proper
remedies, see the “DAB” section in “Troubleshooting” on
page 106.
Preparing the DAB tuning
I n i t i a t e S c a n
DAB
Notes
Scanning 30%
FINISH [015]
B B C R a d i o 4
