Yamaha YSP-30D Owner'S Manual Download Page 6

Page: 6 / 122

Features

The “

” logo and “IntelliBeam” are trademarks of

YAMAHA Corporation.

The “

” logo and “Cinema DSP” are registered

trademarks of YAMAHA Corporation.

Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks
of Dolby Laboratories.

“DTS” and “Neo:6” are registered trademarks of DTS, Inc.

“HDMI”, the “HDMI” logo and “High-Definition Multimedia
Interface” are trademarks or registered trademarks of HDMI
Licensing LLC.

Manufactured under license from 1 Ltd. Worldwide patents
applied for.

The “

” logo and “Digital Sound Projector

™

” are trademarks

of 1 Ltd.

TruBass, SRS and the “

” symbol are registered trademarks

of SRS Labs, Inc. TruBass technology is incorporated under
license from SRS Labs, Inc.

™

is a trademark of DiMAGIC Co., Ltd.

“iPod” is a trademark of Apple Inc., registered in the U.S. and
other countries.

The “DAB Digital Radio” logo and the stylised “r” mark ® and ©
Digital One Limited.

iPod

Summary of Contents for YSP-30D



























































































































Search results

Summary of Contents for YSP-30D

Reviews:

Related manuals for YSP-30D

Brands by name

Popular brands

Yamaha YSP-30D, Owner'S Manual

Search results

Summary of Contents for YSP-30D

Reviews:

Related manuals for YSP-30D

Brands by name

Popular brands