Yamaha YS1070T Owner'S Manual Download Page 5 | Manualshive

Page: 5 / 84

Yamaha YS1070T Owner'S Manual Download Page 5

Introduction

Congratulations on your purchase of your new Yamaha.
This manual will provide you with a good basic understanding of the operation and main-
tenance of this machine.
If you have any questions regarding the operation or maintenance of your machine,
please consult a Yamaha dealer.

TIP

• Some illustrations and text shown in this manual may differ from the actual model due

to changes in specifications or other reasons.

• Take care of this manual. Please attach this manual to the product when it is lent or

transferred to another person.

• When depositing the product, batteries, oil or other components, consult a Yamaha

dealer for guidelines on protecting the environment.

• All Yamaha products have warranty cards.

Read the warranty card carefully, check to see that the dealer name is sealed on its
rear side, and keep the card in a safe place.

* Product and specifications are subject to change without notice.

PLEASE READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPER-
ATING THE MACHINE.

WARNING

Copyright

YS1070T

OWNER’S MANUAL

©2020 by Yamaha Motor Powered

Products Co., Ltd.

1st Edition, April 2020

All rights reserved.

Any reprinting or unauthorized use

without the written permission of

Yamaha Motor Powered

Products Co., Ltd.

is expressly prohibited.

Printed in Japan

7XE-28199-U6-E0.book 1 ページ２０２０年５月１日　金曜日　午後３時４３分

«
...
3
4
5
6
7
...
»

Summary of Contents for YS1070T





















































































Reviews:

No comments