2
Installation
2-19
r
Place the cover on the base side.
Placing the cover
Step 14
Place the cover so that
it is not damaged.
23224-HM-00
t
Reattach the cover in the reverse
order of detachment.
It is recommended to replace the O-rings
and seals with new ones. If these parts are
not replaced or reattached, the dust/drip
proof performance or the degree of
cleanliness may lower.
For details about the bellows clamp position,
see the Fig. on the right.
3
12
1.5
Clamp
Step 15
The bellows end face is flush
with the clamp ring end face.
Clamp ring
Clamp ring
Rubber
Rubber
Bellows end face
* Install the bellows and clamp at the positions
shown in the Fig. above.
(Tolerance: ±0.5 mm)
Almost this orientation
Rubber
Reattach the clamp
so that the projection
part of the clamp shown
in the Photo is located
in the clearance of the
black rubber.
23225-HM-00
Summary of Contents for YK250XGC
