Yamaha YFM35FGIY Owner'S Manual Download

Page: 39 / 166

4-20

NOTICE

ECB00130

Do not store metal or sharply edged objects,
like tools, in the storage compartment. If they
must be stored, wrap them in appropriate
cushion material to prevent damaging the stor-
age compartment.

●

Do not exceed the load limit of 2.0 kg (4 lb)
for the storage compartment.

●

Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.

TIP

There is a check hose at the bottom of the storage
compartment. If any water collects in this hose, re-
move the hose, empty it, and then install it.

EBU18961

Front carrier

●

Do not exceed the load limit of 40.0 kg (88 lb)
for the front carrier.

●

Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.

1. Storage compartment

1. Storage compartment check hose

U4S212E0.book Page 20 Thursday, April 17, 2008 9:17 AM

Summary of Contents for YFM35FGIY







































































































































































Search results

Summary of Contents for YFM35FGIY

Reviews:

Related manuals for YFM35FGIY

Brands by name

Popular brands

Yamaha YFM35FGIY, Owner'S Manual

Search results

Summary of Contents for YFM35FGIY

Reviews:

Related manuals for YFM35FGIY

Brands by name

Popular brands