Yamaha XG250, Service Manual

Page: 33 / 278

TIGHTENING TORQUES
2-17
Rear shock absorber and relay
arm
M10 1 40 Nm (4.0 m•kg, 29 ft•lb)
Relay arm and frame M12 1 50 Nm (5.0 m•kg, 36 ft•lb)
Relay arm and connecting rod M12 1 59 Nm (5.9 m•kg, 43 ft•lb)
Connecting rod and swingarm M12 1 59 Nm (5.9 m•kg, 43 ft•lb)
Chain case and swingarm M6 2 7 Nm (0.7 m•kg, 5.1 ft•lb)
Pivot shaft M12 1 53 Nm (5.3 m•kg, 38 ft•lb)
Steering shaft and ring nut M22 1 4 Nm (0.4 m•kg, 2.9 ft•lb)
See
NOTE.
Steering shaft and handle M22 1 110 Nm (11.0 m•kg, 80 ft•lb)
Fuel tank and frame (front) M6 1 7 Nm (0.7 m•kg, 5.1 ft•lb)
Fuel tank and frame (rear) M6 2 7 Nm (0.7 m•kg, 5.1 ft•lb)
Fuel tank and fuel cock M6 1 7 Nm (0.7 m•kg, 5.1 ft•lb)
Handlebar upper holder M8 4 23 Nm (2.3 m•kg, 17 ft•lb)
Sidestand and nut M10 1 44 Nm (4.4 m•kg, 32 ft•lb)
Sidestand switch M5 2 4 Nm (0.4 m•kg, 2.9 ft•lb)
Rear master cylinder M6 2 13 Nm (1.3 m•kg, 9.4 ft•lb)
Rear footrest bracket M8 4 23 Nm (2.3 m•kg, 17 ft•lb)
Rear footrest bolt M8 2 23 Nm (2.3 m•kg, 17 ft•lb)
Front footrest cover bolt M6 2 10 Nm (1.0 m•kg, 7.2 ft•lb)
Brake pedal M10 1 30 Nm (3.0 m•kg, 22 ft•lb)
Rear brake caliper cover M6 2 7 Nm (0.7 m•kg, 5.1 ft•lb)
Chain support M6 2 7 Nm (0.7 m•kg, 5.1 ft•lb)
Seal guard M5 3 5 Nm (0.5 m•kg, 3.6 ft•lb)
Front fork cap bolt M30 1 23 Nm (2.3 m•kg, 17 ft•lb)
Steering shaft pinch bolt M8 4 23 Nm (2.3 m•kg, 17 ft•lb)
Front wheel axle and nut M14 1 85 Nm (8.5 m•kg, 61 ft•lb)
Spoke (front) BC3.5 — 3 Nm (0.3 m•kg, 2.2 ft•lb)
Spoke (rear) BC3.2 — 3 Nm (0.3 m•kg, 2.2 ft•lb)
Front hub and brake disk M6 6 10 Nm (1.0 m•kg, 7.2 ft•lb)
Front caliper and front fork leg M10 2 40 Nm (4.0 m•kg, 29 ft•lb)
Rear wheel axle and nut M14 1 85 Nm (8.5 m•kg, 61 ft•lb)
Rear hub and brake disk M8 3 28 Nm (2.8 m•kg, 20 ft•lb)
Rear wheel sprocket M8 6 33 Nm (3.3 m•kg, 24 ft•lb)
Front caliper bleed screw M7 1 6 Nm (0.6 m•kg, 4.3 ft•lb)
Item
Thread
size
Q’ty Tightening torque Remarks
LT
LT