Yamaha WR 155 Owner'S Manual Download Page 29

Page: 29 / 92

Instrument an

control functions

4-10

EAU12892

Brake lever

The brake lever is located on the right
side of the handlebar. To apply the
front brake, pull the lever toward the
throttle grip.

EAU12944

Brake pe

The brake pedal is located on the right
side of the motorcycle. To apply the
rear brake, press down on the brake
pedal.

EAUM2083

Fuel tank cap

To remove the fuel tank cap

1. Open the fuel tank cap lock cover.
2. Insert the key and turn it 1/4 turn

counterclockwise. The lock will be
released and the fuel tank cap can
be removed.

To install the fuel tank cap

1. Push the fuel tank cap into posi-

tion with the key inserted.

2. Turn the key clockwise to the orig-

inal position, and then remove it.

3. Close the lock cover.

1. Brake lever

1. Brake pedal

1. Fuel tank cap lock cover
2. Unlock.

UB3MEZE0.book Page 10 Thursday, December 26, 2019 2:23 PM

Summary of Contents for WR 155





























































































Search results

Summary of Contents for WR 155

Reviews:

Related manuals for WR 155

Brands by name

Popular brands

Yamaha WR 155, Owner'S Manual

Search results

Summary of Contents for WR 155

Reviews:

Related manuals for WR 155

Brands by name

Popular brands