Yamaha WR 155 Owner'S Manual Download

Page: 44 / 92

Perio

ic maintenance an

justment

7-2

EAU46882

TIP



The annual checks must

e performe

every year, except if a kilometer-

ase

maintenance is performe

in-

stea



From 16000 km, repeat the maintenance intervals starting from 4000 km.



Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and tech-
nical skills.

EAU46932

Perio

ic maintenance chart for the emission control system

NO.

ITEM

CHECK OR MAINTENANCE JOB

ODOMETER READING (whichever comes first)

ANNUAL

CHECK

1000 km

1 month

4000 km

4 months

7000 km

7 months

10000 km

10 months

13000 km

13 months

Fuel line

• Check fuel hoses for cracks or

damage.

√

Fuel filter

• Check condition.
• Replace if necessary.

Every 12000 km (7500 mi)

Spark plu

• Check condition.
• Clean and regap.

√

• Replace.

Every 8000 km (5000 mi)

Valves

• Check valve clearance.
• Adjust.

Every 10000 km (6200 mi)

Fuel injection

• Adjust engine idling speed.

√

Exhaust system

• Check for leakage.
• Tighten if necessary.
• Replace gasket(s) if necessary.

√

UB3MEZE0.book Page 2 Thursday, December 26, 2019 2:23 PM

Summary of Contents for WR 155





























































































Search results

Summary of Contents for WR 155

Reviews:

Related manuals for WR 155

Brands by name

Popular brands

Yamaha WR 155, Owner'S Manual

Search results

Summary of Contents for WR 155

Reviews:

Related manuals for WR 155

Brands by name

Popular brands