Yamaha WR 155 Owner'S Manual Download Page 35

Page: 35 / 92

Instrument an

control functions

4-16

With the engine turned off:
1. Set engine stop switch to run position.
2. Turn main switch to on position.
3. Shift transmission into neutral.
4. Push the start switch.

Does the engine start?

The neutral switch may not be working.

The vehicle should not be ridden

until

checked by a Yamaha dealer.

5. Stop the engine.
6. Set engine stop switch to run position.
7. Shift transmission into gear.
8. Pull the clutch lever.
9. Push the start switch.

Does the engine start?

The clutch switch may not be working.

The vehicle should not be ridden

until

checked by a Yamaha dealer.

YES

The system is OK.

The motorcycle can be ridden.

YES

If a malfunction is found, have the vehicle
inspected before riding.

WARNING

UB3MEZE0.book Page 16 Thursday, December 26, 2019 2:23 PM

Summary of Contents for WR 155





























































































Search results

Summary of Contents for WR 155

Reviews:

Related manuals for WR 155

Brands by name

Popular brands

Yamaha WR 155, Owner'S Manual

Search results

Summary of Contents for WR 155

Reviews:

Related manuals for WR 155

Brands by name

Popular brands