Instrument an
d
control functions
4-6
4
EAU87610
Fuel reserve tripmeter
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter “TRIP F” and starts counting the
distance traveled from that point.
To reset the fuel reserve tripmeter,
push the “RESET/SELECT” button un-
til it is reset.
TIP
If you do not reset the fuel reserve trip-
meter manually, it will reset automati-
cally and disappear from the display
after refueling and traveling 5 km (3 mi).
EAUN2960
Clock
The clock uses a 12-hour time system.
To set the clock
1. Push the “RESET/SELECT” but-
ton until the hour digits start flash-
ing.
2. Use the “RESET/SELECT” button
to set the hours.
3. Push the “RESET/SELECT” but-
ton until the minute digits start
flashing.
4. Use the “RESET/SELECT” button
to set the minutes.
5. Push the “RESET/SELECT” but-
ton until the minute digits stop
flashing. The setting is confirmed.
TIP
If you do not push the “RESET/SE-
LECT” button to confirm the setting
within 90 seconds, the clock will not be
set and will return to the prior time.
EAU87750
Instantaneous fuel consumption
d
isplay
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either “km/L” or
“L/100 km”. To switch the fuel con-
sumption measurement units, push the
“RESET/SELECT” button until the
measurement units change.
“km/L”: the distance that can be
traveled on 1.0 L of fuel.
1. Fuel reserve tripmeter
1
1. Clock
1
1. Instantaneous fuel consumption display
1
UB3MEZE0.book Page 6 Thursday, December 26, 2019 2:23 PM
