Yamaha WOLUERINE RMAX Owner'S Manual Download

Page: 133 / 194

9-20

EBU37642

Transmission oil

Check and change the transmission oil at the
intervals specified in the periodic mainte-
nance chart.

NOTICE

ECB02910

When checking or changing the transmis-
sion oil, make sure that no foreign material
enters the transmission. If necessary,
clean the filler cap and surrounding area.

To check the transmission oil level

1. Park the vehicle on a level surface.
2. Remove the passenger seat cushion.
3. Pull the tab to lift up the rubber cover.

4. Remove the transmission oil dipstick and

wipe it clean.

Recommended oil:

YAMALUBE
SAE 80W-90 API GL-5 Hypoid gear oil

Oil quantity:

1.40 L (1.48 US qt, 1.23 Imp.qt)

1. Rubber cover

UB4J10E0.book Page 20 Monday, June 22, 2020 10:41 AM

Summary of Contents for WOLUERINE RMAX



































































































































































































Search results

Summary of Contents for WOLUERINE RMAX

Reviews:

Related manuals for WOLUERINE RMAX

Brands by name

Popular brands

Yamaha WOLUERINE RMAX, Owner'S Manual

Search results

Summary of Contents for WOLUERINE RMAX

Reviews:

Related manuals for WOLUERINE RMAX

Brands by name

Popular brands