5-39
5
To use an auxiliary DC jack
1. Start the engine. (See page 7-2.)
2. Turn the headlights off. (See page 5-15.)
3. Make sure the accessory is off.
4. Open the auxiliary DC jack cap.
5. Insert the accessory power plug into the
jack.
6. Turn the accessory on.
TIP
Turn off the accessory before plugging in-
to/unplugging from the jack.
When the auxiliary DC jack is not being
used, cover it with the cap.
NOTICE
ECB02111
The combined load of the accessories
connected to the front and rear auxiliary
DC jacks must never exceed the stated
maximum capacity. Exceeding the maxi-
mum capacity may overload the circuit
and cause the fuse to blow.
If accessories are used while the head-
lights are on and/or without the engine
running, the battery may discharge.
Do not use an automotive cigarette light-
er or other accessories with a plug that
gets hot, because the jack can be dam-
aged.
EBU39460
Auxiliary DC connectors
This vehicle is equipped with auxiliary DC
connectors. Consult your Yamaha dealer be-
fore installing any accessories.
Total DC jack system capacity:
10 A (120 W)
USB jack maximum capacity:
2.1 A (10.5 W)
UB4J10E0.book Page 39 Monday, June 22, 2020 10:41 AM
