background image

6-9

6

Tire inspection

When the tire tread depth has worn to 3 mm
(0.12 in) replace the tire. If the tire has a nail or
glass fragments in it, or if the sidewall is
cracked, replace the tire.

OPERATING TIRE PRESSURE (cold):

VEHICLE LOAD of 0.0–200.0 kg (0–441 lb)

FRONT: (Recommended)

110.0 kPa (1.100 kgf/cm², 16.0 psi)

REAR: (Recommended)

110.0 kPa (1.100 kgf/cm², 16.0 psi)

Front: (Minimum)

103.0 kPa (1.030 kgf/cm², 15.0 psi)

Rear: (Minimum)

103.0 kPa (1.030 kgf/cm², 15.0 psi)

VEHICLE LOAD of 200.0–510.0 kg (441–
1124 lb)

FRONT: (Recommended)

117.0 kPa (1.170 kgf/cm², 17.0 psi)

REAR: (Recommended)

200.0 kPa (2.000 kgf/cm², 29.0 psi)

Front: (Minimum)

110.0 kPa (1.100 kgf/cm², 16.0 psi)

Rear: (Minimum)

193.0 kPa (1.930 kgf/cm², 28.0 psi)

Vehicle load is total weight of operator, pas-
sengers, accessories, cargo, and trailer 
tongue weight. Do not exceed maximum 
vehicle load of 510.0 kg (1124 lb).

1. Tire tread depth

1

UB4J10E0.book  Page 9  Monday, June 22, 2020  10:41 AM

Summary of Contents for WOLUERINE RMAX



































































































































































































Reviews: