Instrument operation
39
By switching the display units, the speed can
be shown in kilometers per hour “km/h” or
miles per hour “MPH”.
TIP:
“MPH” is selected as the display unit at the
Yamaha factory.
To switch the speedometer display units:
Start the engine, stop the engine, and then
push the engine stop switch 3 times, pushing
the switch for 0.4 seconds or more each time,
before the multifunction information center
turns off. The speedometer display units
change.
To switch the speedometer display units
again, repeat this procedure.
EJU31464
Tachometer
The tachometer shows the engine speed.
The outer numbers
×
1000 r/min and display
segments on the meter show the engine
speed.
EJU43891
Shift indicator
This indicator shows the reverse gate shift
positions: “F” (forward), “N” (neutral), and “R”
(reverse). (See page 31 for shifting proce-
dures.)
EJU31515
Fuel level meter
The fuel level meter shows the amount of fuel
remaining in the fuel tank. The amount of re-
maining fuel is shown using eight display
segments, which disappear two at a time as
the fuel level decreases.
1
Engine stop switch
1
Speedometer
1
1
1
Tachometer
1
Shift indicator
2
“F” (Forward position)
3
“N” (Neutral position)
4
“R” (Reverse position)
1
2
3
4
1
UF4G72E0.book Page 39 Tuesday, August 1, 2017 11:30 AM
