Yamaha VP1, Owner'S Manual

Page: 53 / 174

3 - 16
BASICS
Chapter 3 Learning the Basics
Quick Edit
Quick Edit
The Quick Edit function allows you to perform simple real-time voice editing.
General Description
You use the Quick Edit panel to perform real-time editing of voice elements. Use the
Quick Edit selectors ( and ) and the four sliders to select and adjust the desired
parameters. During performance, you can essentially use these sliders as additional
controllers.
The Quick Edit panel gives you access to 16 preselected parameters, each with a
relatively large impact on the final sound. Note that these parameter allocations are
permanent and cannot be changed.
1 : EQ LOW Low band equalization
2 : EQ LO-MID Low-mid band equalization
3 : EQ HI-MID High-mid band equalization
4 : EQ HIGH High band equalization
5 : AT FOLLOW Aftertouch following
6 : VEL SENS Velocity sensitivity
7 : POR TIME Portamento time
8 : EF DEPTH Effect depth
9 : LFO DEPTH LFO oscillation amplitude
10 : LFO SPEED LFO oscillation speed
11 : LFO DELAY LFO time lag
12 : LFO HOLD LFO-effect hold time
13 : EG ATTACK Envelope generator’s attack rate
14 : EG DECAY Envelope generator’s decay rate
15 : EG SUSTN Envelope generator’s sustain level
16 : EG RELSE Envelope generator’s release rate
The parameter names are arranged in a four-by-four grid, as shown.
EQ LOW
EQ LO-MID EQ HI -MID EQ HIGH
AT FOLLOW VEL SENS POR TIME EF DEPTH
LFO DEPTH LFO SPEED LFO DELAY LFO HOLD
EG ATTACK EG DECAY EG SUSTN EG RELSE
FYI
• A quick edit slider is usable only if at least one of the LEDs along the right of the slider is
switched on. LEDs will come on only if VP1 channels and MIDI channel settings are in
agreement. (
➝
REFERENCE: 2-8)