App - 6
REFERENCE
Appendix
No effects
• Remember that the VP1 does not apply effects to the signals going to the ELEMENT
jacks. Effects are only applied to signals to the OUTPUT jacks.
Problems caused by Inappropriate system settings
No sound
• Check that the “Local” parameter is set to “on”.
(
➝
REFERENCE: 2-8)
• If you are trying to drive the VP1 from an external MIDI: does the transmit channel
of the external device match the receive channel on the VP1?
(
➝
REFERENCE: 2-8)
Every alternate note on the keyboard fails to play.
• The Note On/Off parameter is probably set to “odd” or “even”. Change the setting to
“all”.
(
➝
REFERENCE: 2-8)
Keys don’t produce the expected pitch.
• Check the setting of the “Keyboard Transpose” parameter.
(
➝
REFERENCE: 2-6)
• Check the setting of the “Master Tune” parameter.
(
➝
REFERENCE: 2-4)
• Is voice microtuning affecting the pitch?
(
➝
REFERENCE: 1-28)
Controllers don’t provide expected control.
• Are controllers firmly connected?
(
➝
BASICS: 1-10)
• Have you changed the Assignable Controller settings?
(
➝
REFERENCE: 2-10)
• Remember that when “Controller Hook” is “on”, controllers do not become effective
until they move past the corresponding internal controller settings.
(
➝
BASICS: 2-4)
Key-strike force does not affect velocity.
• Have you selected an appropriate velocity curve?
(
➝
REFERENCE: 2-6)
• The “Fixed Velocity” parameter may be set to a value other than “off”.
(
➝
REFERENCE: 2-6)
Troubleshooting
Summary of Contents for VP1
