Yamaha Viking YXM70VPHH 2016 Owner'S Manual Download | Manualshive

Page: 37 / 172

background image

4-3

4

EBU31290

Neutral indicator light “N”

This indicator light comes on when the drive
select lever is in the “N” position.

EBU31300

Reverse indicator light “R”

This indicator light comes on when the drive
select lever is in the “R” position.

EBU31310

Parking brake indicator light “ ”

This indicator light comes on when the park-
ing brake is applied.

EBU31320

On-Command four-wheel-drive
indicator “ ”, On-Command differential
gear lock indicator “ ” and indicator light
“DIFF. LOCK”

The On-Command four-wheel-drive
indicator “ ” comes on when the On-Com-
mand drive knob “2WD/4WD/DIFF LOCK” is
set to the “4WD” position.

The On-Command differential gear lock
indicator “ ” and the On-Command differen-
tial gear lock indicator light “DIFF. LOCK”
come on when the On-Command drive knob
“2WD/4WD/DIFF LOCK” is set to the “DIFF
LOCK” position.

TIP



Due to the synchronizing mechanism in the
differential gear case, the four-wheel-drive
indicator may not come on until the vehicle
starts moving.



When the On-Command drive knob
“2WD/4WD/DIFF LOCK” is set to “DIFF
LOCK” or “4WD”, the indicator “ ” and the
indicator light “DIFF. LOCK” will flash until
the differential gear is completely locked or
unlocked. If the indicator and the indicator
light continue to flash, the differential is not
completely locked or unlocked. In this
case, start moving to allow time for the dif-
ferential to lock or unlock.

UB427BE0.book Page 3 Friday, February 5, 2016 2:14 PM

«
...
35
36
37
38
39
...
»

Summary of Contents for Viking YXM70VPHH 2016













































































































































































Reviews:

No comments

Related manuals for Viking YXM70VPHH 2016

Brand: Landoll Pages: 76

Brand: wsm Pages: 25

Brand: Suzuki Pages: 576

Brand: Suzuki Pages: 139

Brand: Roketa Pages: 15

Beast 1000 Series

Brand: BMS Pages: 114

Brand: Can-Am Pages: 144

Powermover PM5900

Brand: Ultra-Fab Pages: 18

Brand: Ivarssons i Mestjö Pages: 32

Brand: TrailMaster Pages: 7

Brand: TrailMaster Pages: 22

Brand: Troxus Pages: 12

Brand: Ventrac Pages: 83

Brand: Valor Pages: 41

Brand: ODES UTVS Pages: 41

Brand: Moni Pages: 16

Brand: KAYO MOTOR Pages: 138

Brand: Gatekeeper Systems Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands