Yamaha UD-Stomp User Manual Download Page 4

Page: 4 / 32

Thank you for purchasing the Yamaha UD-Stomp.

To fully understand the functions and to obtain maxi-

mum life from this device, please read this Owner’s Manual
carefully before using. Also, after reading this manual
please keep it in a safe place for future reference.

Contents

Owner’s Manual

Precautions .................................................. 5

Nomenclature ............................................... 6

■

Top Panel ......................................................... 6

■

Rear Panel ....................................................... 9

Connections ............................................... 10

■

Connecting the Power .................................... 10

■

Connecting the UD-Stomp ............................. 10

■

Connecting Headphones ................................ 11

■

Digital Output .................................................. 11

■

Connecting an Expression (EXP) Pedal ......... 11

■

Connecting MIDI Devices ............................... 11

Using the UD-Stomp .................................. 12

■

Preparation .................................................... 12

• Selecting an Effect Band ................................ 13

• Setting the Delay Time .................................... 13

• Setting the Feedback ...................................... 14

• Setting the Filters ............................................ 14

• Setting the Pan ............................................... 14

• Setting the Delay Level ................................... 14

• Setting the Tap ................................................ 14

• Setting the Modulation .................................... 15

• Connecting Multiple Effect Bands (CONNECT) ...... 15

• Grouping Multiple Effect Bands (GROUP) ...... 16

• Syncing Multiple Effect Bands (SYNC) ........... 17

• Selecting a Wave (WAVE) .............................. 17

• Setting the Phase (PHASE) ............................ 18

• Setting the Effect and Direct Volume Levels ... 18

• Setting the Pan of the Direct Sound ............... 18

• Setting the Output Volume .............................. 18

Selecting and Saving Patches .................. 19

■

Try Selecting Another Patch .......................... 19

■

Create and Store a Patch .............................. 21

Convenient Functions ............................... 22

External Control Settings .......................... 24

Utility Mode ................................................. 25

■

About the Utility Mode .................................... 25

■

MIDI Functions ............................................... 25

■

External Control Settings ............................... 26

■

EXP Pedal Settings ........................................ 27

Trouble Shooting ........................................ 28

Error Messages .......................................... 28

Specifications ............................................. 29

MIDI Implementation Chart ....................... 30

Summary of Contents for UD-Stomp

































Search results

Summary of Contents for UD-Stomp

Reviews:

Related manuals for UD-Stomp

Brands by name

Popular brands

Yamaha UD-Stomp, User Manual

Search results

Summary of Contents for UD-Stomp

Reviews:

Related manuals for UD-Stomp

Brands by name

Popular brands