Yamaha UD-Stomp, User Manual

Page: 27 / 32

27
Utility Mode
●
Set the External Controller
Press the [BAND 3] button and use the [UP]/[DOWN]
buttons to select the type of controller (
EP
,
1
-
31
,
64
-
95
).
* Refer to [External Control Settings] (page 24)
●
Set the Parameter to be Controlled
Press the [BAND 4] button and use the [UP]/[DOWN]
buttons to select the parameter to be controlled
(
ti1
-).
* Refer to [External Control Settings] (page 24)
●
Set the Parameter’s Minimum Value
Press the [BAND 5] button and use the [UP]/[DOWN]
buttons to set the parameter’s minimum value (the
parameter’s value when the controller is set to its
minimum:
0.0
-
10.0
).
* Refer to [External Control Settings] (page 24)
●
Set the Parameter’s Maximum Value
Press the [BAND 6] button and use the [UP]/[DOWN]
buttons to set the parameter’s maximum value (the
parameter’s value when the controller is set to its
maximum:
0.0
-
10.0
).
* Refer to [External Control Settings] (page 24)
■
EXP Pedal Settings
These settings are available when the EXP Pedal
“
E.P
” is selected as the controller in the External
Control Settings Section. (
→
page 24)
After pressing the [UTILITY] button, use the [UP]/
[DOWN] buttons to select “
E.P
” in the display. Then
press the [STORE] button to enter the EXP Pedal
setting mode.
●
Set the Minimum Value of the EXP Pedal
Sets the minimum value that indicates the position
of the EXP Pedal.
Press the [BAND 1] button and use the [UP]/[DOWN]
buttons to set the position (
0
-
128
).
You can also hold the [BAND 1] button and move
the EXP Pedal to set the position.
* Due to the relationship between the maximum and minimum
value, a value which results in a practical range (refer to the
illustration below) of less than 128 can not be used.
●
Set the Maximum Value of the EXP Pedal
Sets the maximum value that indicates the position
of the EXP Pedal.
Press the [BAND 2] button and use the [UP]/[DOWN]
buttons to set the position (
127
-
255
).
You can also hold the [BAND 2] button and move
the EXP Pedal to set the position.
* Due to the relationship between the maximum and minimum
value, a value which results in a practical range (refer to the
illustration below) of less than 128 can not be used.
* The value can not be set greater than that of the EXP Pedal’s
Switch Setting.
●
Transmitting Control Change Numbers from
the EXP Pedal
Set the MIDI control change number that is to be
transmitted when the EXP pedal is used.
Press the [BAND 3] button and use the [UP]/[DOWN]
buttons to set the control change number.
•
oFF
: MIDI is not transmitted
•
1
-
32
,
64
-
95
:
Control change number that is to be
transmitted.
Minimum
Value
Maximum
Value
Maximum
Adjustable
Range
Practical Effective Range
(more than 128)