Yamaha UD-Stomp, User Manual

Page: 21 / 32

21
Selecting and Saving Patches
■
Create and Store a Patch
Original settings can be stored in the USER AREA
(011-933). Try creating an original patch and then
store it.
●
Storing Procedure
1. Press the [STORE] button.
When you enter the Store Mode, the display, the
[STORE] lamp and the foot switch lamp corre-
sponding to the patch number will flash.
2. Select the patch (group, bank, patch number) to
which you want to store the patch.
Use the same procedure as described in [Try
Selecting Another Patch] (page 19) to select a
patch. You can use the [UP]/[DOWN] buttons, the
foot switches and the BANK switch to select the
patch number. However, you cannot change the
AREA (it can only be assigned to the USER
AREA).
3. After select the patch you want to store your
patch in, hold the [STORE] button.
The store operation is complete when all lamps
light.
* To interrupt the Store operation, quickly press and release
the [STORE] button.
* Utility mode settings are not stored with patch data. As com-
mon settings for all patches, their contents are stored in the
UD-Stomp memory.
* The OUTPUT knob’s setting is not stored with the patch data.
* Data in the USER AREA (011-933) can be stored in an exter-
nal MIDI device. (
→
page 26)
* MIDI cannot be received while storing.
This procedure can be used to store original patches
and also used to rearrange the order of patches for
use during live performance.