Yamaha UD-Stomp, User Manual

Page: 25 / 32

25
Utility Mode
The Utility Mode is used for settings that cover the overall system of the UD-Stomp such as
the foot switch, MIDI, external control, EXP. pedal jack, etc.
* In this section, some button names have been shortened, for instance [EFFECT BAND 1] button is written as [BAND 1] button.
ted from the UD-Stomp’s MIDI OUT jack to a con-
trol an external effector, etc. from the UD-Stomp.
Assigns to the patch, a MIDI PRG No. that will be
transmitted when the patch is recalled.
* When a patch is recalled with a MIDI program change com-
mand, MIDI PRG. Numbers can not be transmitted.
Press the [BAND 3] button to set the UD-Stomp’s
patch number. Just as in selecting a patch in the
Play Mode, use the [UP]/[DOWN] buttons or the
footswitch.
•
011
-
933
,
0.11
-
9.33
:
The patch number to be recalled.
Press the [BAND 4] button to set the MIDI PRG No.
to be transmitted. Use the [UP]/[DOWN] buttons to
select the number.
•
1
-
128
: MIDI Program Change No.
●
Set the MIDI Receive Channel
Sets the UD-Stomp’s MIDI Receive Channel.
The MIDI channel set in this step is also used as
the device number for the bulk receive function.
Press the [BAND 5] button and use the [UP]/[DOWN]
buttons to set the MIDI receive channel.
•
1
-
16
: MIDI channel over which messages are
received.
•
ALL
: MIDI messages from all channels are
received
•
oFF
: MIDI messages are not received
●
Set the MIDI Transmit Channel
Sets the UD-Stomp’s MIDI Transmit Channel.
The MIDI channel set in this step is also used as
the device number for the bulk out function.
Press the [BAND 6] button and use the [UP]/[DOWN]
buttons to set the MIDI transmit channel.
•
1
-
16
: MIDI channel over which messages are
transmitted.
●
ON/OFF Setting for MIDI Merge
Sets whether or not the MIDI signal that is received
via the UD-Stomp’s MIDI IN jack will also be retrans-
mitted via the MIDI OUT jack.
■
About the Utility Mode
When in the Play Mode, press the [UTILITY] button
to enter the Utility Mode (the lamp lights).
When in the Utility Mode press the [UTILITY] button
to return to the Play Mode (the lamp goes off).
When in the Utility Mode MIDI messages can
not be received. Use the Play Mode to receive
MIDI messages.
In the Utility Mode, the three following functions are
available. Use the [UP]/[DOWN] buttons to select a
function.
• MIDI Functions (
mmd
)
• External Control Settings (
CtL
)
• EXP. Pedal Settings (
E.P
)
■
MIDI Functions
After pressing the [UTILITY] button, use the [UP]/
[DOWN] buttons to select “
mmd
” in the display. Then
press the [STORE] button to enter the MIDI Func-
tions Setting Mode.
●
Create a MIDI Program Change Receive Table
Sets the corresponding patch that will be recalled
when a MIDI Program Change No. (referred to as
PRG No. from here on) is received.
Press the [BAND 1] button to set the receiving MIDI
PRG No. Use the [UP]/[DOWN] buttons to select
the number.
•
1
-
128
: MIDI Program Change No.
Press the [BAND 2] button to set the UD-Stomp’s
patch number. Just as in selecting a patch in the
Play Mode, use the [UP]/[DOWN] buttons or the
footswitch.
•
011
-
933
,
0.11
-
9.33
:
The patch number to be recalled.
●
Create a MIDI Program Change Transmit Table
When a footswitch (1-3) is pressed to recall a patch
a MIDI Program Change Number can be transmit-