Yamaha TYROS Owner'S Manual Download Page 155

Page: 155 / 176

Making Global and Other Important Settings – Function

Reference

155

TYROS Owner’s Manual

153

■

TYPE

.......................................................................................................................................................................

The Harmony/Echo types are divided into the following groups, depending on the particular effect applied.

●

Harmony Types

When any of the Harmony Types is selected, the Harmony effect is applied to the note played in the right-hand section of the
keyboard according to the type selected above and the chord specified in the chord section of the keyboard shown below.

●

Echo Types

When any of the Echo Types is selected, the corresponding effect (echo, tremolo, trill) is applied to the note played in the right-hand
section of the keyboard in time with the currently set tempo, regardless of the [ACMP] and the LEFT part on/off status. Please note
that two notes held on the keyboard are played alternately when Trill is selected.

●

Multi Assign Type

Multi Assign automatically assigns notes played simultaneously on the right-hand section of the keyboard
to separate parts (voices). For example, if you play three consecutive notes, the first is played by the
RIGHT1 voice, the second by the RIGHT2 voice, and the third by the RIGHT3 voice. The Multi Assign
effect is not affected by the [ACMP] and LEFT part on/off status.

■

Related parameters

●

VOLUME

Determines the level of the harmony/echo notes generated by the Harmony/Echo effect. This parameter is available
for all types with the exception of “Multi Assign.”

●

SPEED

Determines the speed of the Echo, Tremolo, and Trill effects. This parameter is only available when Echo, Tremolo,
or Trill is selected in Type above.

●

ASSIGN

This lets you determine the keyboard part via which the harmony/echo notes will be sounded. This parameter is
available for all types with the exception of “Multi Assign.”

●

CHORD NOTE ONLY

When this is set to “ON,” the Harmony effect is applied only to the note that belongs to a chord played in the chord section of the
keyboard. This parameter is not available only for the Harmony type above.

●

TOUCH LIMIT

Determines the lowest velocity value at which the harmony note will sound. This allows you to selectively apply the harmony by
your playing strength, letting you create harmony accents in the melody. The harmony effect is applied when you play the key
strongly (above the set value). This parameter is available for all types with the exception of “Multi Assign.”

Echo Types

These types apply the echo effect to the note
in the right-hand section of the keyboard in
time with the currently set tempo.

Harmony Types

These types apply the harmony effect to
the note in the right-hand section of the
keyboard according to the chord speci-
fied in the left-hand section of the key-
board. (Please note that “1+5” and
“Octave” settings are not affected by the
chord.)

Multi Assign

This type apply the special effect to the
chord played in the right-hand section of
the keyboard.

ACMP

LEFT

LEFT HOLD

RIGHT1

RIGHT2

PART ON / OFF

ACMP

LEFT

LEFT HOLD

RIGHT1