Panel Controls and Terminals
19
TYROS Owner’s Manual
1
2
INPUT
AC INLET
MIC / LINE IN
L / L+R
R
MAIN
SUB
LINE OUT
L / L+R
R
LOOP SEND
TRIM
MIN
MAX
L / L+R
R
AUX IN / LOOP RETURN
TRIM
MIN
MAX
TO LEFT SPEAKER
TO SUB
WOOFER
L
R
L / L+R
R
LOOP SEND
For installing the included
music rest.
See page 21.
For installing an optional
set of speakers.
See page 20.
See page
The TRIM con-
trol allows the
input sensitiv-
ity of the AUX
IN L/L+R and
R (LOOP
RETURN)
jacks to be
adjusted for
optimum level
matching with
the connected
equipment.
The TRIM control allows
the input sensitivity of
the MIC/LINE IN jacks
to be adjusted for opti-
mum level matching
with the connected
equipment.
The TYROS includes a microphone/line input jack
into which just about any standard microphone or
line-level source with a 1/4" phone plug can be
plugged (a dynamic microphone with an impedance
of 250 ohms is recommended). The microphone or
line input can be used with the TYROS’ vocal har-
mony function.
The LOOP SEND jacks deliver the output of the TYROS for connection to
external signal processing devices, such as distortion or filter effects. The
output from the signal processor can be returned to the AUX IN/LOOP
RETURN jacks — letting you apply the desired effect(s) to the overall sound
of the TYROS and return the processed sound back to the TYROS.
The LINE OUT jacks are used to send the TYROS output to a keyboard
amplifier, stereo sound system, mixing console, or tape recorder. If you are
connecting the TYROS to a mono sound system, use only the L/L+R jack.
When only this jack is connected (using a standard phone plug), the left and
right channels are combined and output through this jack — allowing you
have a mono mix of the TYROS’ stereo sound.
• See page 20.
Stereo System
17
Summary of Contents for TYROS
Page 1: ......