Recording Your Performances and Creating Songs — Song Recording
Quick Guide
55
TYROS Owner’s Manual
4
Start recording.
The SONG CONTROL [REC] button (that flashes before recording) lights continuously after recording starts. Below
are details on how recording can be started.
●
Recording starts as soon as you play a key on the keyboard.
• When turning the [ACMP] and the [SYNC START] on, style playback and recording start simultaneously as soon
as a chord is played in the style chord section of the keyboard (the left side of the split point).
• When turning the [ACMP] on and the [SYNC START] off, recording starts as soon as a chord is played in the
style chord section of the keyboard (the left side of the split point) with the Stop Accompaniment (page 33).
●
Recording starts by pressing the SONG CONTROL [START/STOP] button.
If you start recording in this way, “empty” data is recorded until you play a note on the keyboard. This is useful
for creating a measure or two of silence at the top of a song. It can also be used for starting a song with a short one-
or two-beat pick-up or lead-in.
• The rhythm parts (channels) of style playback and recording start simultaneously by pressing the STYLE CON-
TROL [START/STOP] button.
●
Multi Pad playback and recording start simultaneously as soon as you press any of the Multi Pads.
5
Press the [REC] button to stop recording.
6
Listen to your newly recorded performance.
Press the [TOP] button so that the song playback position returns back to the top and press the SONG CONTROL
[START/STOP] button.
7
If necessary, re-record a specific section of the recorded song or
record an additional section to the end of the recorded song.
Repeat steps #2 - #6 above. You can selectively re-record parts of the song by starting recording in the middle of the
song and stopping it when desired, or you can record continuously all the way to the end of the song.
8
Make sure to save the song data to the USER or FD drive when recording is completed.
Call up the USER or FD page of the Song selection (Open/Save) display by pressing one of the SONG buttons and
execute the save.
Indicates the position (mea-
sure number and beat) of the
currently recorded song.
START/
STOP
SYNC START
NEW SONG
REC
TOP
REW
FF
START/
STOP
SYNC START
NEW SONG
START/
STOP
SYNC START
NEW SONG
REC
TOP
REW
FF
REC
TOP
REW
FF
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
The pop-up window for entering the
name of the song file appears at the
bottom of the display. After entering the
name, press the [OK] LCD button ([8]
up button) to save the song file name
and recorded data to the User drive.
For instructions on entering names,
see page 70.
• The recorded song will be lost if you change to
another song or you turn the power off without
executing the save operation in step #8. Make
sure to execute the save operation in step #8.
53
Summary of Contents for TYROS
Page 1: ......
