Yamaha TT600R, Service Manual

Page: 169 / 380

FRONT FORK
4-56
CHAS
OIL LEAKAGE FROM DUST SEAL
If there is a leakage of oil from between the dust
seal (1) and the inner tube (2) replace the oil seal
(refer to “SEAL AND BUSH REPLACEMENT”
section).
ANOMALOUS HYDRAULIC BRAKING
If the fork shows an anomalous hydraulic braking
effect it is necessary to overhaul the damper cylin-
der assembly.
WARNING
Never tamper with the damper cylinder
assembly! This operation should be done by
authorized personnel. Tampering with the
damper cylinder assembly by non authorized
personnel can compromise the safety of the
front fork. The building firm will not assume
any responsibility for any damages resulting
from such action.
2
1
19. Insert:
•
Damper cylinder assembly (in the inner
tube)
20. Insert an Allen key in the bolt (3) at the bot-
tom of the outer tube and the special tool (1)
with the holder (2) on the damper cylinder
assembly and screw the bolt completely.
During tightening the bolt ensure that the end
of the damper rod holder is correctly engaged
on the damper cylinder assembly.
CAUTION:
21. Fill:
•
Fork leg oil
Refer to “OIL REPLACEMENT”section.
T-handle (1):
90890-01326
Front fork damper rod holder (2):
90890-01460
Damper cylinder assembly bolt (3):
25 Nm (2.5 kgm)