Yamaha TT600R, Service Manual

Page: 91 / 380

INSP
ADJ
REAR SHOCK ABSORBER ADJUSTMENT
3-39
NOTE:
•
Use the special wrench included in the
owner's tool kit to make the adjustment.
•
The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The longer distance A is, the lower the
spring preload; the shorter distance A is, the
higher the spring preload. With each com-
plete turn of the adjusting nut, distance A
changes by 1.5 mm.
Spring preload:
Minimum (soft):
Distance A = 217 mm
Standard:
Distance A = 211 mm
Maximum (hard):
Distance A = 205 mm
2. Tighten the locknut to the specified torque.
Always tighten the locknut against the adjust-
ing nut, and then tighten the locknut to the
specified torque.
CAUTION:
Locknut:
45 Nm (4.5 m·kgf)