Yamaha TT-R125E(W), Owner'S Service Manual

Page: 247 / 289

5 - 48
CHAS
ASSEMBLY AND INSTALLATION
Throttle grip assembly
1. Install:
●
Collar
1
●
Handlebar grip (right)
2
Apply the adhesive on the tube guide
3
.
NOTE:
Before applying the adhesive, wipe off grease
or oil on the tube guide surface
a
with a lac-
quer thinner.
Handlebar
1. Install:
●
Handlebar
1
●
Handlebar holder
2
●
Main switch
(TT-R125E/TT-R125LWE)
3
●
Main switch holder
(TT-R125E/TT-R125LWE)
4
●
Bolt (handlebar holder)
5
NOTE:
●
Align the punched mark
a
on the handlebar
with the upper surface of the handlebar
holder on the upper bracket.
●
The handlebar holder should be installed
with the punched mark
b
forward.
●
First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
1
2
3
4
5
T
R .
.
23 Nm (2.3 m · kg, 17 ft · lb)
HANDLEBAR