Yamaha TG500, Owner'S Manual

Page: 80 / 334

68
PERFORMANCE EDIT MODE / 3: Full Edit. 3-1: Layer
3-1-06: NOTE LIMIT-L / 3-1-07: NOTE LIMIT-H
If the High Note Limit is set to a note that is lower than the Low Note
Limit for the same layer, it will set a range of notes in the middle that the
layer will not play.
The name of the currently selected voice is shown in the upper right corner
of the display (“--------” appears if the voice is turned off). An animated musi-
cal note appears to the right of voices that are on and active (i.e. not muted).
NtLmt-H
(High note limit)
Range: C-2 … G8
Individually sets the high note limit for each active layer (the highest note
that each layer will produce).
Use the [
,] and [.] keys (or the standard layer selection procedure) to select
the layer to be edited, then use the [-1/NO] and [+1/YES] keys to set the high
note limit of the voice assigned to that layer.
See the “NtLmt-L” parameter, above, for more details.