Yamaha TG500, Owner'S Manual

Page: 183 / 334

171
When you want to program a single drum key “from scratch,” rather than
editing an existing key, use this function to initialize all data for the specified
drum key.
D R U M V O I C E E D I T M O D E / 1 : K e y P a r a m e t e r
1-2: INITIALIZE
1 - 2 : I N I T I A L I Z E
DRM Key Initialize
(Clave ) Key= C 1
Use the [-1/NO] and [+1/YES] keys or the keyboard connected to the
TG500 to enter the drum key you want to initialize (C1 … C5), then press
[ENTER] to begin the initialize procedure. The following confirmation display
will appear:
DRM Key Initialize Sure?
(Clave ) Key= C 1
Press [+1/YES] to confirm that you want to go ahead with the initialize
operation (which will erase all current edited data), or press [-1/NO] to cancel.
“Completed!” will appear briefly on the display when the drum key data
has been initialized.
See page 285 through 292 for initial drum voice chart.
[PLAY/MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 1: Key Parameter -> [ENTER] -> [PAGE]
-> 1-2: Initialize -> [ENTER]