–19–
ENGINE OIL REPLACEMENT
INSP
ADJ
New
35 Nm (3.5 m
kg)
30 Nm (3.0 m
kg)
ENGINE OIL REPLACEMENT
1. Start the engine and let it warm up for several
minutes.
2. Stop the engine and place an oil pan under the
drain bolt.
3. Remove:
Oil filler plug 1
4. Remove:
Drain bolt (with gasket) 1
Oil filter drain bolt (with gasket) 2
Drain the crankcase and oil tank of its oil.
5. If the oil filter is to be replaced during this oil
change, remove the following parts and rein-
stall them.
Replacement steps:
Remove the oil filter cover 1 and oil filter ele-
ment 2 .
Check the O-rings 3 , if cracked or damaged,
replace them with a new one.
Install the oil filter element and oil filter cover.
Oil filter cover (M10):
10 Nm (1.0 m
kg)
6. Install:
Gaskets
Drain bolt
Oil filter drain bolt
Summary of Contents for TDM850'99 4TX-AE3
Page 1: ......
Page 31: ...25 SIGNAL SYSTEM ELEC EB806000 SIGNAL SYSTEM CIRCUIT DIAGRAM...
