–9–
1
Battery negative lead
2
Battery positive lead
3
Starter motor lead
4
Fuel sender lead
5
Fuel tank drain hose
6
Fuel tank breather hose (for DEU)
7
Water hose
8
Spark plug lead
9
Clutch cable
10
Brake hose
11
Throttle cable
12
Right handlebar switch lead
13
Headlight lead
14
Meter light lead
15
Speed sensor lead
16
Carburetor heater hose
17
Vacuum hose (#1)
18
Vacuum hose (#2)
19
Coolant reservoir breather hose
20
Carburetor breather hose
21
Rear brake switch lead
22
CYCLELOCK lead
A Route the battery positive lead
and battery negative lead through
the clamp.
B Fasten the wireharness Coolant
breather hose and flasher relay
lead.
C Route the carburetor breather
hoses through the engine clamp.
D Fasten the carburetor air vent hose.
E Route the carburetor breather
hoses, vacuum hose (#1) down
ward and vacuum hose (#2) up-
ward through the guide.
F Route the vacuum hose (#1) inside,
vacuum hose (#2) outside through
the guide.
G Fasten the coolant reservoir hose.
H Fasten the wireharness right han-
dlebar switch lead meter lead and
headlight lead with a clamp.
I Route the relay lead through the
outside of wireharness.
CABLE ROUTING
SPEC
Summary of Contents for TDM850'99 4TX-AE3
Page 1: ......
Page 31: ...25 SIGNAL SYSTEM ELEC EB806000 SIGNAL SYSTEM CIRCUIT DIAGRAM...
