Yamaha T8, Rigging Manual

Page: 307 / 497

6-27
Outboard Rigging Guide - 2001
Steer. Friction Kit – 40, C40, 50, C50 Tiller Handle
7. Check the throttle for its fully open position.
a. Turn the shift handle to the in-gear posi-
tion.
b. Turn the throttle grip fully open.
c. Check the throttle valve lever so it
contacts the fully opening stopper.
8. On manual start models (See Illust. A) con-
nect the clamp
1
, engine stop switch lead
(black)
2
, and the engine stop switch lead
(white)
3
.
9. On electric start models without instruments
(See Illust. B), connect the main switch cou-
pler
1
and zip tie
2
.
N O T E : Fit the main switch lead in the clamp and
clamp the wire leads as shown.
10. For electric start models with instruments
(Illust. C), connect the extension wire harness
coupler
1
, main switch wire lead coupler
2
,
trim sender lead coupler
3
, oil level gauge
coupler
4
, power trim/tilt switch lead cou-
pler
5
, clamp
6
, and zip tie
7
.
N O T E : Fit the extension wire lead in the clamp.
Clamp the wire leads as shown.
Throttle Friction
1. Adjust the friction control nut
1
according to
the following chart.