Yamaha SY99, Owner'S Manual

Page: 277 / 344

UTILITY MODE
MDR: The number of files saved by the MDR
function (see MIDI data recorder utility, page
279)
Misc.: The number of all other types of files
Remarks: When this job is selected the currently
inserted disk will be checked immediately, so be
sure to insert the disk before you select the job.
There are no settings to make in this job.
DISK UTILITY
2. Load from disk
JUMP #817
Summary: Synthesizer, sequencer, or card data can
be loaded from disk.
Procedure:
From: disk utility job directory (JUMP #816)
Select: 02:Load From Disk (JUMP #817)
Specify: the type of data to be loaded.
Press: ENTER
Select: the file from which to load the data.
To execute: the loading operation press F8 (Go).
To quit: without loading press EXIT.
Move the cursor in this area to select the type cf
data you wish to load from disk.
01: All Data: All data of the SY99
02: Synth All: 64 voices, 64 multis, 32 pan, 2
micro tuning, and system setup
03: Seq All: K-Seq data and setup data of the
sequencer section
04: Syn Setup: Synthesizer system setup data
from a disk file that was saved as "All
Data"
05: Vc & Mit: 64 voices, 64 multis, from a disk
file that was saved as "All Data"
06: Pan: 32 pan data from a disk file that was
saved as "All Data"
07: McrTuning: 2 micro tuning data from a disk
file that was saved as "All Data"
08: Seq Setup: Setup data from a disk file that
was saved as "All Data"
09: Song & Ptn: 1 song and pattern sequencer
data from a disk file that was saved as "All
Data"
10: Other Seq: Sequencer data in K-Seq, E-Seq,
N-Seq, or standard MIDI file format
11: 1 Voice: A single selected voice from a disk
file that was saved as "All Data"
12: 1 Multi: A single selected multi from a disk
file that was saved as "All Data"
13: 1 Song: A song that was saved as "1 Song"
14: Card: Data that was saved as "Card"
Types of load operations: The data that can be
loaded by each operation depends on the type of
save operation that was used (refer to the following
section 3.Save to disk):
Data that was saved using this
operation:
01 All Data
02:Synthesizer All
03:Sequencer All
04:1 Song
05:Song ESEQ
06:MIDl File
07:Card
an be loaded using this
operation:
01:AII Data, 04:Syn Setup
05:Vc & Mit, 06:Pan
07:McrTuning,
08:Seq Setup
09:Song & Ptn, 1 1 : 1 Voice
12:1 Multi
2:Synth All
3:Seq All
13:1 Song
10:0ther Sequence
10:0ther Sequence
14:Card
The load operation procedure may vary slightly de-
pending on the type of load operation selected.
Details are given below.
Load from disk (types 1-8 and 14): As the chart
above shows, load operation types 1 and 4-9
can only be used to load data saved as "All
Data." Load operations type 2 and 3 are used to
load data saved as "Synthesizer All" and
"Sequencer All", respectively. Load operation
type 14 is used to load data saved from a data
card.
266