PATTERN MODE
Summary: In pattern record mode you can make
settings in preparation to recording a pattern.
You can specify either realtime or step record-
ing, set the time signature and length of the pat-
tern, and make other settings for click and sync
as in the Pattern Play display.
Procedure:
From: pattern play display
Press: RECORD and the RECORD LED will
light.
Select: the recording mode.
To begin: recording press RUN.
To end: recording press STOP.
Receive Channel (1-16, omni, kbd): This deter-
mines the source of data that will be recorded by
the sequencer. Normally you will set this to
"kbd" so that data from the SY99's keyboard
will be recorded.
If you want to record data from an external
MIDI device on a specific channel, set this to 1-
16 so that data received at MIDI IN on the
specified channel will be recorded.
If you want to record data from an external
MIDI device on all channels then set this to
"omni" so that all data received at MIDI IN will
be recorded.
Click (off, rec, rec/play, always): This deter-
mines when the click (metronome) will sound.
off: The metronome will not sound.
rec: The metronome will sound only during
recording.
rec/play: The metronome will sound during
recording or playback.
always: The metronome will sound constantly.
Click Beat (1/4, 1/6, 1/8, 1/12, 1/16, 1/24): This
determines the beat on which the click will
sound.
Sync (internal, MIDI): This determines the tim-
ing source which will control the sequencer. Nor-
mally you will leave this set to internal so that
the SY99's own clock will determine the tempo.
If you are using an external MIDI sequencer
and want the SY99's sequencer to play in
synchronization with it, set this to MIDI so that
MIDI clock messages received at MIDI IN will
determine the tempo.
Recording mode (Real, Step): Press F1 or F2 to
select the recording mode.
Realtime recording (press Fl): Notes will be
recorded at the exact time you play them.
Step recording (press F2): Notes will be
recorded one by one with the specified time
value, regardless of the actual timing at which
you play.
PATTERN (01...99): Select the pattern you
wish to record.
Measure (01...32): This determines the mea-
sure from which the pattern will begin playback.
You can modify this by moving the cursor here
and specifying the measure, or by using the se-
, LOCATE, or
).
quencer location buttons (|
Time (01-08/4, 01-16/08, 01-32/16): This
determines the time signature of the pattern to
be recorded. It can be modified only for patterns
which have not yet been recorded.
(30...250): This determines the tempo in
quarter notes per minute.
Used (0...100%): This displays the amount of
unused sequencer memory.
Length (1... 32): This indicates the length of the
pattern. It can be modified only if the pattern has
not yet been recorded.
Quantize (off, 1/32, 1/24, 1/16, 1/12, 1/8, 1/4,
1/2); This determines the timing accuracy to
which the notes you play will be corrected.
When quantization is turned off the notes you
play will be recorded at the exact timing they
occur. When a quantization of 1/32... 1/2 is
selected, all notes you play will be moved to the
nearest timing at the specified interval.
237
Pattern record
Summary of Contents for SY99
