Yamaha SY-35, Product Manual

Page: 75 / 135

ELEMENT TONE
ELEMENT COPY
] cursor keys to
Summary: Copies all element parameters from an
element of the same type (AWM or FM) in
another voice to the current element of the cur-
rent voice.
Settings: Source: I, C, P
Bank: 1 ... 8
Number: 1 ... 8
Element: A/C or B/D
Procedure: Use the [ ] and [
move the cursor to the source, bank, or number
of the source voice (the voice from which the
element parameters are to be copied) to the left
of the lower display line. Use the [-1/NO] and
[+1/YES] keys to set the selected parameter as
necessary.
Next move the cursor to the element type
parameter to the right of the lower display line,
and select the element from which the data is to
be copied using the [-1/NO] and [+1/YES]
keys.
Press the [ ] cursor key one more time and the
"Are you sure?" display will appear. Press
[+1/YES] to execute the element copy operation
or [-1/NO] to cancel. ">>Completed!!<<" will
appear briefly when the copy operation has
finished.
Details: In this display the source, bank and num-
ber parameters are shown in the standard SY35
voice number format. "P12," for example, is pre-
set bank 1, number 2; "135" is internal bank 3,
number 5, etc.
Data can only be copied between elements of
the same type. If the element currently being
edited is an AWM element (A or C), only ele-
ment A or C of the source voice can be copied
from. the same applies to FM elements.
The data for all parameters contained in the
ELEMENT TONE mode will be copied.
FREQUENCY SHIFT
Summary: Shifts the frequency (pitch) of the
selected element up or down in semitone steps.
Settings:-12...0 ...+12.
Details: A setting of "-12," for example, shifts the
pitch of the selected element down by one oc-
tave; a setting of "+4" shifts the pitch up by a
major third.
The Frequency Shift function can be used to
transpose an element to its most useful range,
or to create harmony (intervals) between differ-
ent elements.
Procedure: Use the [ ] key to move the cursor to
19
the lower display line. Use the [-1/NO] and
[+1/YES] keys to select the desired amount of
frequency shift.