Yamaha SY-35 Page 74 Product Manual Download

Page: 74 / 135

ELEMENT TONE

FM WAVEFORM LIST

FM Voice Category Descriptions

Piano
Organ
Brass
Wood
Reed
Pluck
Bass
Str.

Electric pianos.
Electric organs.

A variety of brass sounds.
Woodwind instrument sounds.
Sax, oboe and other reed instruments.
Guitar, clavi, and other plucked instrument sounds.

Bass sounds.
Strings.

Perc.
Syn.S
Syn.M
Syn.D
SFX
OSC1
OSC2
OSC3

Vibes, marimba, bells and other percussion sounds.
Sustained lead synth sounds.
Synth sounds that vary with time.

Decay-type synth sounds.
A range of sound-effect type synth sounds.
Sine, sawtooth, and other standard synth waveforms.
Basic FM timbres, group 1 .
Basic FM timbres, group 2.

If the TYPE parameter in the ELEMENT

ENVELOPE edit mode (page 27) is set to
PRESET, selecting a WAVE TYPE also selects

the corresponding preset envelope. If a different
envelope type is selected, the preset envelope is

not selected together with the wave.

Summary of Contents for SY-35








































































































































Search results

Summary of Contents for SY-35

Reviews:

Related manuals for SY-35

Brands by name

Popular brands

Yamaha SY-35, Product Manual

Search results

Summary of Contents for SY-35

Reviews:

Related manuals for SY-35

Brands by name

Popular brands